Boo 3

R 850.00

Pure carbon 3" frame, small size, big performance

Out of stock

Secure online ordering

FreeCurrencyRates.com

  • Introduction
  • This little monster is the smaller brother of the Taboo airframe.

Boo is designed to run 3" props and small motors, either 13XX, 14XX size motors.

We hit the shrink button on this frame and brought the frame weight way down, we do however, maintaining a full 3mm thick, pure carbon fibre base plate. This means all the performance and reliability of its bigger 5" brother, with none of the small frame compromise. 

Boo carries all your regular FPV equipment, including a full size 26 x 26mm camera, 36 x 36mm FC and regular 20A ESCS on the arms.

Boo is capable of fitting any of the full size RunCam FPV cameras, it is also possible to fit the new RunCam swift mini. A full compliment of carbon fibre camera brackets make sure you can lock your camera in safely and reliably at any angle you choose with out worrying about it shifting in a crash. 

The Knuckle-duster

Have a look at the front end of your Boo, you'll see a series of small notches running up the side plates of the frame, these make out your camera angle for your full-size FPV camera. The first notch is 10deg. the next is 20deg. and so on, no more guessing! 

The build?

If you have built up a Taboo, this frame will be a piece of cake to build! There is actually more vertical stack space available on this little monster than on Taboo, the unique single bottom plate design maximises internal space while minimising overall frame weight.   


Included

Boo comes with all the carbon, fasteners, and standoffs required to put your frame together.

The Boo VTX mounting kit now comes with two different options for mounting any VTx which you may have.

Boo also comes with extra nuts, bolts, washers, o-rings, aluminium standoffs, everything you need to hold your frame together.

You don't have to worry about loosing a nut or bolt and not being able to complete your build!

We have you covered!


Compatibility?

So you have accessories for your Taboo 4, 5 or 6" airframes?

Both the mobius and GoPro style camera mounts for your Taboo airframe fit the Boo3".

Your battery protector cage for your Taboo airframe is also compatible with your new Boo 3" airframe.

No need to buy new accessories the old ones still fit! If you don't have accessories for your Boo airframe check out the links below..... 


Accessories

The HD camera mount designed for your GoPro full frame and Session style cameras is available here:

https://fridayfpv.com/Product/Detail/61


The HD camera mount designed for your mobius, RunCam and Legend style cameras is available here:

https://fridayfpv.com/Product/Detail/106


A must have, to stop jello in your footage and to prevent your camera from moving around, is the HD camera mat :

https://fridayfpv.com/Product/Detail/86


Check out this awesome HD camera option here:

RunCam HD2

https://fridayfpv.com/Product/Detail/87


There are two options available for you battery protection cage, a simple flat cage:

https://fridayfpv.com/Product/Detail/62


And a raked forward cage for pointing you in the right direction on the starting line:

https://fridayfpv.com/Product/Detail/69


Required

As far as is practically possible, Boo accepts most fpv electrical hardware. The frame was designed as such to encourage the use of whatever equipment you are most comfortable.


These two camera options are available here:

RunCam Swifft Rotor Riot Edition

https://fridayfpv.com/Product/Detail/93

RunCam Owl Plus
https://fridayfpv.com/Product/Detail/102


Recommended    

  • Something to note, this frame is so much fun because of its nimble and blistering performance, this is due to its small size and light overall flying weight. Where ever possible be mindful of the equipment you use on this frame and try to keep it as light as possible.

    If you like a slightly heavier feel, rather keep the equipment weight low and go for a slightly larger battery, like a 1050mAh. 



  Please note the photos for this product were taken during final prototyping, finish, component flow, fastener colour and selection may change without notification.  

Boo 3
10 % OFF